Wirewerks’ NextSTEP™ Technology™ fiber management system is a multi-award winning solution for fiber management applications in Data Centers, MSO/Broadband networks and Enterprise LANs. The NextSTEP system includes rack and wall-mount patch panels; the industry’s smallest footprint/highest density optical distribution frame (ODF); two series (styles) of slide-in fiber management modules, splice trays and adapter modules; and Wirewerks’ exclusive magnetic fiber management accessories.
Wirewerks NextSTEP 3-Series Patch Modules are one of a family of slide-in NextSTEP 3-Series fiber management modules that are fully compatible with all NextSTEP patch panels and enclosures. 3-Series modules occupy three horizontal slots (shelf positions) in NextSTEP panels, presenting all front mounted ports in the same vertical plane (flush), with support for up to 96 fibers/ports in 1RU as preferred by many users.
NextSTEP 3S-Patch Modules are used to house incoming pre-terminated cable assemblies or to provide fusion splicing for up to 24 LC or 12 SC ports on the front of each module, providing up to 96 LC or 48 SC ports in 1RU.
Each NextSTEP 3S-Patch Module includes one or (optionally) two removable Mini-Splice Trays that facilitate fusion splicing of loose-tube, tight-buffered or ribbon cables while providing routing, strain-relief and bend-radius protection for fibers within the module.
NextSTEP 3S-Patch Modules present all front facing LC/SC ports in the same vertical plane (flush) allowing easy port access for patching and maintenance operations. Installation and maintenance is made easier and faster with a removable front faceplate. Port identification is made easy with a large slide-out port ‘labeling plate’ that provides generous space for recording port ID details and the module’s internal configuration. The ‘labeling plate’ slides out without disturbing the attached module or any surrounding modules, allowing technicians to verify a module’s port addresses and internal configuration without disturbing fibers or connections.
NextSTEP 3S-Patch Modules include integrated cable management features that provide routing, strain-relief and bend-radius protection. These features secure cables, splices and connectors within the module, eliminating unwanted movement in adjacent fibers or connections when attaching or removing patch cords or performing maintenance operations.
Applications:
- Data Centers
- SANs
- MSO/Broadband Networks
- Enterprise LANs
Features and Benefits:
- Compatible with all NextSTEP patch panels and enclosures
- 24 LC or 12 SC patch ports per module; up to 96 LC or 48 SC ports in 1RU
- All front mounted ports presented in the same vertical plane for easy access
- Modules slide-in/out without special tools
- Removable faceplate makes installation easier and faster; includes easy-to-view labeling space
- Self-contained, removable Mini-Splice Tray (stackable - up to two per module) supports on-board fusion splicing complete with magnetic splice sleeve holders; provides fiber routing, bend radius protection and strain-relief
- High-contrast yellow thermoplastic Mini-Splice Tray reduces technician eyestrain and speeds installation while increasing installation quality and yield
- Exclusive, new CableMate™ cable attachment and strain relief device secures incoming cable(s) in Mini-Splice Tray without traditional cable-ties, eliminating performance impairments from crushed cables (cable-ties supported if preferred)
- Fiber management features secure cables and connectors within the module, eliminating unwanted movement in fibers and connections during patching and maintenance operations
- Two cable entry points at rear of module