BonDuit® Conduit Adhesive joins polyethylene duct to PVC, fiberglass, and metal duct using standard PVC couplings. This rapid-cure, two-part resin adhesive forms a durable bond for a strong, permanent, water-tight joint.
Adhesive Shear Strength
Typical bond strengths were measured by joining two pieces of HDPE conduit with a PVC coupling and BonDuit Adhesive. The force required to pull apart the joint after 24 hours at 70° F was measured.
Hydrostatic (Pressure) Testing
BonDuit Conduit Adhesive forms a water-tight joint. HDPE duct was joined to PVC duct with a PVC coupling and the adhesive. The ducts were filled with water, sealed, pressurized to 60 psi, and observed over time for leakage. The joint was then subjected to a short duration, high pressure test.
BonDuit Conduit Adhesive bonds polyethylene to:
- PVC Couplings
- Concrete Vaults
- Transition Couplings
- Above Ground Conduits
- Steel Sweeps and Elbows
- Fiberglass and Composite Connections
Additional Product Features:
- Easy to use
- Fast cure
- Durable bond
- Water-tight and air-tight seal
- High tensile strength
- Suitable for most common ducts